USB 2.0 AM to CM charge/sync cable for smart phones; USB 3.0 Network Adapter for Windows, Mac, macOS; USB-C to HDMI adapter cable for MacBook; what we are doing. USB Type C Cable. USB Type C Dongle. Network - Cable. USB 2.0/3.0 Cable. USB 3.0/2.0 Adapter. Audio & Video; For Apple; Network; Power Cord. Easily connect peripherals to your home or office network with this Insignia™ NS-PU98505 adapter that offers a reliable link between a USB 2.0 port and your 10 Mbps Ethernet network. A driver CD enables simple installation. The USB31000S USB 3.0 to Gigabit Ethernet Adapter adds a single RJ45 Ethernet port to a USB-enabled computer system, with support for Gigabit network connections at full bandwidth, unlike USB.
This sounds like macOS could simply be missing a driver for the device, and so does not recognize when it's connected. Was the device specifically designed for use on a newer Mac circa the USB C hub and USB C 3.5mm jack adapter, or is this a generic/3rd party USB ETH adapter? Jul 2 '17 at 4:54. Driver for the UE-1000T-G2 USB GIGABIT ETHERNET ADAPTER FOR MACBOOK AIR. Mac 10.7 driver in English.
Note for Windows 10 users: Drivers for the USB3-E1000, the USBC-E1000, and USB3-HUB3ME (V1) are pre-installed in Windows 10, and there is no need to download drivers. Just plug in your adapter, wait a moment while the driver is set up, then access the network. If you have any problems with this, please contact us at [email protected]
Click one of the buttons below to see drivers for that platform.Windows
If you wish to pre-install drivers before your adapter arrives, just download and run the utility from the link below:
After downloading, simply double-click on the .exe file to begin installation. You will receive a confirmation that the process has begun, and another upon successful completion- this should take less than a minute on most systems.
Note: ARM-based Windows 8/8.1 tablets such as the Microsoft Surface RT do not have drivers for the ASIX 88179 built in. ASIX does not provide a Surface RT compatible driver for installation.
Windows PC’s with internet access should automatically download and install drivers from Windows Update.
A driver CD-ROM* is also provided in the packaging with the product. *Please note that Windows 8/8.1 driver is not loaded on the CD, however it can be downloaded from the link above.macOS
For macOS 10.6 through 10.14.x
To install the ASIX 88179 driver on macOS 10.6 through 10.14.x ONLY, download the driver from the link below:
- macOS Universal Binary Driver (DMG file format)
- For macOS 10.6-10.14.x
- Note: macOS 10.13-10.14.x requires users to manually approve 3rd party extensions (drivers). Step-by-step instructions for doing so can be found in our blog post here
For macOS 10.15 Catalina and newer only:
As of macOS 10.15 Catalina, we no longer officially support ASIX USB Ethernet adapters in macOS due to a cumbersome installation process that does not meet our expectations, but, ultimately, is functional for most customers. These changes are a result of Apple’s implementation of DriverKit and changed requirements for drivers and installation in 10.15. For more information, please find our blog post here.
- macOS Universal Binary Driver (DMG file format)
- For macOS 10.15 and newer only
- Instructions: We have written detailed installation instructions for assistance in this process due to the currently less user-friendly installation experience. The instructions can found in our blog post here
Linux kernels 3.8 and earlier require rebuild of kernel module from source. Recent distributions running 3.9 or later should have the driver built-into kernel.Chrome OS
Chrome OS supported with latest software updates installed. The drivers are included as part of the kernel used by Chrome OS.
Latest drivers and other platforms
Please see the ASIX AX88179 driver download page for complete list of the latest drivers and supported platforms for the AX88179 chip in the Plugable USB3-E1000, USBC-E1000, and USB3-HUB3ME (V1), including minimal .inf packages for suitable for Windows deployment.
The adapters and cables in this article work with these Mac computers and iPad Pro devices:
- Mac models that have Thunderbolt 3 ports. These ports support both Thunderbolt 3 and USB-C connections.
- Mac models that have a USB-C port. This port supports USB-C connections.
- iPad Pro models that have a USB-C port. This port supports USB-C connections.
To find the right cable or adapter for your Mac or iPad Pro, use the information below to identify the connector on the end of the cable coming from your display, hard drive, camera, hub, or other device. Check the end meant to plug into your Mac or iPad Pro.
If you're using an Apple Thunderbolt 3 cable or other Thunderbolt 3 cable with your display or other device, it will connect to your Mac without an adapter.
The Apple Pro Display XDR and LG UltraFine 5K Display use Thunderbolt 3.
If you're using a mophie USB-C Cable with USB-C Connector or other USB-C cable with your device, it will connect to your Mac or iPad Pro without an adapter.
The LG UltraFine 4K Display uses USB-C.
If you're using a USB-A cable with your device, use the Apple USB-C to USB Adapter, the Apple USB-C Digital AV Multiport Adapter, the Apple USB-C VGA Multiport Adapter, or another USB-C to USB-A adapter to connect your device to your Mac or iPad Pro.
Usb To Ethernet Macbook
To charge an iPhone, iPad, or iPod touch from a Thunderbolt 3 or USB-C port without one of these adapters, you can use the Apple USB-C to Lightning Cable instead.
If you're using an Ethernet cable with your device, use a third-party USB-C to Ethernet adapter, such as the Belkin USB-C to Gigabit Ethernet Adapter.
Thunderbolt or Thunderbolt 2
If you're using a Thunderbolt or Thunderbolt 2 cable with a Thunderbolt display or other device, use the Apple Thunderbolt 3 to Thunderbolt 2 Adapter.
This is the correct adapter for the Apple Thunderbolt Display.
Thunderbolt and Thunderbolt 2 are not the same as Mini DisplayPort . They have the same shape, but use different symbols on the cable and port.
If you're using a Mini DisplayPort cable with a Mini DisplayPort display, use a third-party USB-C to Mini DisplayPort adapter. Check with its manufacturer for compatibility with your Mac and display model.
Mac To Ethernet Adapter
This is the correct solution for the Apple LED Cinema Display.
Mini DisplayPort is not the same as Thunderbolt or Thunderbolt 2 . They have the same shape, but use different symbols on the cable and port.
If you're using a DisplayPort cable with your display, use a third-party USB-C to DisplayPort adapter or cable, such as the Moshi USB-C to DisplayPort Cable.
If you're using an HDMI cable with your display, use the Apple USB-C Digital AV Multiport Adapter or a third-party USB-C to HDMI adapter or cable.
If you're using a VGA cable with your display, use the Apple USB-C VGA Multiport Adapter. Or use a third-party USB-C to VGA adapter, such as the Belkin USB-C to VGA Adapter.
If you're using a DVI cable with your display, use a third-party USB-C to DVI adapter or cable. Check with its manufacturer for compatibility with your Mac and display model.
- You can use your USB-C Power Adapter and charge cable with any Thunderbolt 3 or USB-C port on your Mac or iPad Pro.
- If you have an Apple TV connected to your TV, projector, or other display, you can use AirPlay to wirelessly stream video to that display, or extend the desktop of your primary display.
- Learn about using external monitors with your Mac.
- Learn more about using the USB-C port on your iPad Pro.